Singh, R. ed.
Weld Cracking in Ferrous Alloys
Woodhead Pub. 2008.12
576 pp.(H)
ISBN 1-84569-300-0
33,600円
Contents
1.Welding Technology and Design to Prevent Weld Cracking/ 2. Weld Crack Behaviour, Evaluation and Repair/ 3. Environment-Assisted Weld Cracking/ Index/
* Weld cracks are unacceptable defects that can compromise the integrity of welded structures. Weld cracking can lead to structural failures which at best will require remedial action and at worst can lead to loss of life. Weld cracking in ferrous alloys reviews the latest developments in the design, evaluation, prevention and repair of weld cracks. *
Lohwasser, D. & Chen, Z. ed.
Friction Stir Welding
From Basics to Applications
Woodhead Pub. 2009.12
436 pp.(H)
ISBN 1-84569-450-3
30,200円
Contents
1. Introduction/ 2. The friction stir welding process: an overview/ 3. Material deformation and joint formation in friction stir welding/ 4. Friction stir welding equipment/ 5. Industrial applications of friction stir welding/ 6. The future of friction stir welding/ 7. Inspection and quality control in friction stir welding/ 8. Residual stresses in friction stir welding/ 9. Effects and defects of friction stir welds/ 10. Modeling thermal properties in friction stir welding/ 11. Metallurgy and weld performance in friction stir welding/ Index/
* Friction stir welding (FSW) is a highly important and recently developed joining technology that produces a solid phase bond. It uses a rotating tool to generate frictional heat that causes material of the components to be welded to soften without reaching the melting point and allows the tool to move along the weld line. *
NCCER
Welding Level 1 Trainee Guide 4th ed.
Prentice Hall 2009.7
480 pp.(H)
ISBN 0-13-610651-X
10,800円
Contents
1: 29101-09 Welding Safety (2.5 Hours)/ 2: 29102-09 Oxyfuel Cutting (17.5 Hours)/ 3: 29103-09 Plasma Arc Cutting (7.5 Hours)/ 4: 29104-09 Air Carbon Arc Cutting and Gouging (12.5 Hours)/ 5: 29105-09 Base Metal Preparation (12.5 Hours)/ 6: 29106-09 Weld Quality (10 Hours)/ 7: 29107-09 SMAW-Equipment and Setup (5 Hours)/ 8: 29108-09 Shielded Metal Arc Electrodes (2.5 Hours)/ 9: 29109-09 SMAW-Beads and Fillet Welds (120 Hours)/ 10: 29110-09 Joint Fit-Up and Alignment (5 Hours)/ 11: 29111-09 SMAW-Groove Welds with Backing (30 Hours)/ 12: 29112-09 SMAW-Open V-Groove Welds (80 Hours)/ Index/
* This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! Key content includes Welding Safety, Oxyfuel Cutting, Plasma Arc Cutting, Air Carbon Arc Cutting and Gouging, Base Metal Preparation, Weld Quality, SMAW ― Equipment and Safety, Shielded Metal Arc Electrodes, SMAW ― Beads and Fillet Welds, Joint Fit-Up and Alignment, SMAW ― Groove Welds and Backing, and SMAW ― Open V-Groove Welds. *
Hosford, W. P.
Physical Metallurgy 2nd ed.
金属物性 第２版
CRC Press 2010.4
441 pp.(H)
ISBN 1-4398-1360-4
12,200円
Contents
1. Introduction/ 2. Freezing/ 3. Diffusion/ 4. Surfaces/ 5. Solid Solutions/ 6. Intermediate Phases/ 7. Phase Diagrams/ 8. Dislocations/ 9. Annealing/ 10. Phase Transformations/ 11. Aluminum Alloys/ 12. Copper and Nickel Alloys/ 13. Hexagonal Metals/ 14. Other Nonferrous Alloys/ 15. Steels/ 16. Hardening of Steels/ 17. Tempering and Surface Hardening/ 18. Low Carbon Steels/ 19. Special Steels/ 20. Cast Irons/ 21. Welding/ 22. Powder Processing/ 23. Corrosion/ 24. Magnetic Materials/ Appendix A: Microstructural Analysis/ Appendix B: Stereographic Projection/ Appendix C: Miller-Bravais Indices for Hexagonal Crystals/ Index/
* For students ready to advance in their study of metals, Physical Metallurgy combines theoretical concepts, real alloy systems, processing procedures, and examples of real-world applications. The author uses his experience in teaching physical metallurgy at the University of Michigan to convey this topic with greater depth and detail than most introductory materials courses offer. *
Weng, Y. ed.
Ultra-Fine Grained Steels
超細粒鋼
Springer-Verlag 2009.2
670 pp.(H)
ISBN 3-540-77229-4
33,000円
Contents
1. Austenite structure and grain refining during deformation in ferrite/pearlite steels/ 2. Deformation induced ferrite transformation (DIFT)/ 3. Microstructure refining of low carbon steels produced by Compact Strip.- Production (CSP)/ 4. Microstructure refining theories of bainitic steels/ 5. High strength martensitic steels with grain refining/ 6. Carbide-free bainitic/martensitic multi-phase steels/ 7. Chemical metallurgy and solidification fundamentals of ultra-fine steels/ 8. Fundamentals to homogenize the solidified microstructure/ 9. Welding technology of ultra-fine grained steels/ index/
* This book discusses results of the New Generation Iron and Steel Materials research project funded over the last ten years. Modern sustainability requirements demand that iron and steel meet four conditions: stronger, longer service life, leading-edge manufacturing technology (low cost, material and energy efficient), and environmentally sound (waste recycling, reduced carbon dioxide emission).
* Therefore, new generation iron and steel materials featuring "double strength and double service life" are needed (labeled "ultra steels" in Japan).The author of this book has been engaged in the research of new generation structural materials for the last twelve years being Chief Scientist of three consecutive national research programs in China. *
Chaplot, S. L. et al. ed,
Thermodynamic Properties of Solids
Experiment and Modeling
（固体の熱力学特性）
Wiley-VCH 2010.4
342 pp.(H)
ISBN 3-527-40812-6
22,200円
Contents
1. Thermodynamic Properties of Solids: Experiment and Modeling/ 2. Optical Spectroscopy Methods and High-pressure-high-temperature Studies/ 3. Inelastic Neutron Scattering, Lattice Dynamics, Computer Simulations and Thermodynamic Properties/ 4. Phonon Spectroscopy using Inelastic X-ray Scattering/ 5. Heat Capacity of Solids/ 6. Diffraction and Thermal Expansion of Solids/ 7. Electronic Structure and High-pressure Behaviour of Solids/ 8. Ab-initio Lattice Dynamics and Thermodynamic Properties/ Index/
* Recent years have seen a growing interest in the field of thermodynamic properties of solids due to the development of advanced experimental and modeling tools. Predicting structural phase transitions and thermodynamic properties find important applications in condensed matter and materials science research, as well as in interdisciplinary research involving geophysics and Earth Sciences. *
Blundell, S. J. & Blundell, K. M.
Concepts in Thermal Physics 2nd ed.
Oxford U.P. 2009.10
516 pp.(H)
ISBN 0-19-956209-1
12,600円
Contents
1. Introduction/ 2. Heat/ 3. Probability/ 4. Temperature and the Boltzmann factor/ 5. The Maxwell-Boltzmann distribution/ 6. Pressure/ 7. Molecular effusion/ 8. The mean free path and collisions/ 9. Transport properties in gases/ 10. The thermal diffusion equation/ 11. Energy/ 12. Isothermal and adiobatic processes/ 13. Heat engines and the second law/ 14. Entropy/ 15. Information theory/ 16. Thermodynamic potentials/ 17. Rods, bubbles and magnets/ 18. The third law/ 19. Equipartition of energy/ 20. The partition function/ 21. Statistical mechanics of an ideal gas/ 22. The chemical potential/ 23. Photons/ 24. Phonons/ 25. Relativistic gases/ 26. Real gases/ 27. Cooling real gases/ 28. Phase transitions/ 29. Bose-Einstein and Fermi-Dirac distributions/ 30. Quantum gases and condensates/ 31. Sound waves/ 32. Shock waves/ 33. Brownian motion and fluctuations/ 34. Non-equilibrium thermodynamics/ 35. Stars/ 36. Compact objects/ 37. Earth's atmosphere/ Index/ *
101-40 登録日 10.05.18
