Luo, J. et al. ed.
Advanced Tribology
Proceedings of CIST2008 & ITS-IFToMM2008
Springer-Verlag 2009.11
1055 pp.(H)
ISBN 3-642-03652-X
52,500円
Contents
1. Lubrication/ 2. Friction and wear/ 3. Micro/Nano-tribology/ 4. Tribology of coatings, surface and interface/ 5. Biotribology/ 6. Tribo-chemistry/ 7. Industry tribology/ Index/
* "Advanced Tribology" is the proceedings of the 5th China International Symposium on Tribology (held every four years) and the 1st International Tribology Symposium of IFToMM, held in Beijing 24th-27th September 2008. It contains seven parts: lubrication; friction and wear; micro/nano-tribology; tribology of coatings, surface and interface; biotribology; tribo-chemistry; industry tribology. The book reflects the recent progress in the fields such as lubrication, friction and wear, coatings, and precision manufacture etc. in the world. *
Popov, V. L.
Contact Mechanics and Friction
Physical Principles and Applications
Springer-Verlag 2010.2
362 pp.(H)
ISBN 3-642-10802-4
15,800円
Contents
1. Introduction/ 2. Qualitative Treatment of Contact Problems - Normal Contact without Adhesion/ 3. Qualitative Treatment of Adhesive Contacts/ 4. Capillary Forces/ 5. Rigorous Treatment of Contact Problems - Hertz Contact/ 6. Rigorous Treatment of Contact Problems - Adhesive Contact/ 7. Contact between Rough Surfaces/ 8. Tangential Contact Problems/ 9. Rolling Contact/ 10. Coulomb's Law of Friction/ 11. The Prandtl-Thomlinson Model for Dry Friction/ 12. Friction induced Vibrations/ 13. Thermal Effects in Contacts/ 14. Lubricated Systems/ 15. Viscoelastic Properties of Elastomers/ 16. Rubber Friction and Contact Mechanics of Rubber/ 17. Wear/ 18. Friction under the Influence of Ultrasound/ 19. Numerical Simulation Methods in the Physics of Friction/ 20. Earthquakes and Friction/ 21. Appendix/ 22. Further Reading/ Index/
* This application-oriented book introduces the associations between contact mechanics and friction and with it offers a deeper understanding of tribology. It deals with the associated phenomena of contact, adhesion, capillary forces, friction, lubrication, and wear from one consistent viewpoint. The author goes into (1) methods of rough estimation of tribological quantities, (2) methods for analytical calculations which attempt to minimize the necessary complexity, (3) the crossover into numerical simulation methods. With these methods the author conveys a consistent view of tribological processes in various scales of magnitude (from nanotribology to earthquake research). *
Studer, C.
Numerics of Unilateral Contacts and Friction
Modeling and Numerical Time Integration in Non-Smooth Dynamics
Springer-Verlag 2009.6
182 pp.(H)
ISBN 3-642-01099-7
16,000円
Contents
1.Introduction/ 2.Mathematical Preliminaries/ 3.Non-Smooth Mechanics/ 4.Inclusion Problems/ 5.Time-Stepping/ 6.Augmented Time-Stepping/ 7.The dynamY Software/ 8.Summary/ Index/
* This book is especially suited for people both in research and industry who are interested in the numerical simulation of mechanical systems with unilateral contacts and friction. Such systems can be found in various fields of technical application; consider for example contacts between wheels and ground in vehicle dynamics, walking machines, limit stops and friction in arbitrary kind of mechanisms or contacts between thousands of grains in granular mechanics.
* The book focuses mainly on rigid multibody systems dynamics with unilateral contacts and friction, however, the proposed non-smooth modeling approach is much more general and also well suited for non-rigid applications. *
Lohwasser, D. & Chen, Z. ed.
Friction Stir Welding
From Basics to Applications
Woodhead Pub. 2009.12
436 pp.(H)
ISBN 1-84569-450-3
20,200円
Contents
1. Introduction/ 2. The friction stir welding process: an overview/ 3. Material deformation and joint formation in friction stir welding/ 4. Friction stir welding equipment/ 5. Industrial applications of friction stir welding/ 6. The future of friction stir welding/ 7. Inspection and quality control in friction stir welding/ 8. Residual stresses in friction stir welding/ 9. Effects and defects of friction stir welds/ 10. Modeling thermal properties in friction stir welding/ 11. Metallurgy and weld performance in friction stir welding/ Index/
* Friction stir welding (FSW) is a highly important and recently developed joining technology that produces a solid phase bond. It uses a rotating tool to generate frictional heat that causes material of the components to be welded to soften without reaching the melting point and allows the tool to move along the weld line. *
Rudnick, L. R.
Lubricant Additives 2nd ed.
Chemistry and Applications
CRC Press 2009.4
790 pp.(H)
ISBN 1-4200-5964-5
26,200円
Contents
1.Phenolics and Aromatic Nitrogen Compounds/ 2.Zinc Dithiophosphates/ 3.Ashless Phosphorous and Phosphorus-Sulfur Additives/ 4.Detergents/ 5.Dispersants/ 6.Selection and Application of Solid Lubricants as Friction Modifiers/ 7.Organic Friction Modifiers/ 8.Ashless Antiwear and Organic Sulfur Additives/ 9.Sulfur Carriers/ 10.Olefin Copolymer Viscosity Modifiers/ 11.Polymethacrylate Viscosity Modifiers/ 12.Pour Point Depressants/ 13.Tackiness and Antimisting Additives/ 14.Seal Swell Additives/ 15.Dyes and Chemical Marking Agents/ 16.Biocides as Lubricant Additives/ 17.Surfactants/ 18.Corrosion Inhibitors/ 19.Additives for Bio-Derived and Biodegradable Fluids/ 20.Additives for Crankcase Lubricant Applications/ 21.Additives for Industrial Lubricant Applications/ 22.Additives for Food-Grade Lubricant Applications/ 23.Lubricant Additives for Magnetic Recording Disk Drives/ 24.Additives for Grease Applications/ 25.Long-term Trends in Crankcase Additives/ 26.Long-term Trends in Industrial Lubricant Additives/ 27.Long-term Additive Trends in Aerospace Applications/ 28.Testing Methods for Additive/Lubricant Performance/ 29.Lubricant Industry Related Terms and Acronyms/ 30.Internet Resources for the Additive/Lubricant Industry/ 31.Additive-Supplier Cross-Reference/ Index/ *
Fischer, A. & Bobzin, K. ed.
Friction, Wear and Wear Protection
Wiley-VCH 2009.8
784 pp.(H)
ISBN 3-527-32366-X
36,000円
Contents
1.Plenary Lectures/ 2.Lectures/ 3.Posters/ Index/
* The proceedings collect invited and contributed papers from more than 150 scientists and engineers worldwide which provide an up-to-date overview of the current research on friction and wear, including new systematic approaches as well as innovative technical solutions. *
Awrejcewicz, J. & Pyryev, Y.
Nonsmooth Dynamics of Contacting Thermoelastic Bodies
Springer-Verlag 2008.12
242 pp.(H)
ISBN 0-387-09652-3
13,900円
Contents
1.Introduction/ 2.Thermoelastic Contact of Shaft and Bush in Wear Regime/ 3.Thermoelastic Contact of Parallelepiped Moving Along Walls/ 4.Contact Characteristics During Braking Process/ 5.Thermoelastic Contact of Two Moving Layers with Friction and Wear/n Bibliography/Index/ *
181-36 登録日 10.04.10
