Yu, M.- H. et al.
Structural Plasticity
Limit, Shakedown and Dynamic Plastic Analyses of Structures
Springer-Verlag 2009.7
400 pp.(H)
ISBN 3-540-88151-4
25,800円
Contents
1.Introduction/ 2.Stress, strain and strain-rate tensor/ 3.Yield Function/ 4.Limit Analysis Theorem/ 5.Unified solution for Plastic Limit Analysis of Circular Plates/ 6.Unified solution for Plastic Limit Analysis of Circular Plate Under Arbitrary Load/ 7.Unified solution for Plastic Limit Analysis of Annular Plate/ 8.Unified solution for Plastic Limit Analysis of Oblique plate, Rhombus plate, Rectangle plate and Square Plate/ 9.Unified solution for Plastic Limit Analysis of Pressure Vessels/ 10.Unified solution for Dynamic Plastic Behavior of Circular Plate Under Soft Impact/ 11.Unified solution for Limit Angular Velocity of Rotating Disc/ 12.Unified solution for Plastic Analysis of Orthorgonal Circular Plate/ 13.Shakedown Theorem/ 14.Unified solution for Shakedown Analyses of Pressure Vessel and Rotating Disc/ Index/
* Limit and shakedown analysis for structures can provide a very useful tool for design and analysis of engineering structures. "Structural Plasticity - Limit, Shakedown and Dynamic Plastic Analyses of Structure" provides more general solutions of limit and shakedown analysis for structures by using a unified strength theory. A series of solutions of plates from circular, annular plates to rhombus plates and square plates, rotating discs and cylinders, pressure vessels are presented. These results encompass the Tresca-Mohr-Coulomb solution of structure as special cases. The unified solution, which cannot be obtained by using a single criterion, is suitable to more materials and structures. *
Ozel, T. & Davim, P.
Intelligent Machining
Wiley-ISTE 2009.8
320 pp.(H)
ISBN 1-84821-129-5
14,600円
Contents
* Machining, as a reliable manufacturing process, still offers unmatched capabilities in producing high quality three-dimensional parts from metals, polymers, ceramics, wood and composites. Advances in computational modeling and optimization methods enabled researchers to develop cost effective and high throughput modern machining processes.
* This book aims to provide recent advances intelligent machining for modern manufacturing engineering. It includes six chapters that provide basic fundamentals, modern machining processes, analytical and mechanistic modeling approaches, finite element modeling and systems based modeling, recent optimization methods and case studies. *
Tschaetsch, H.
Applied Machining Technology
Springer-Verlag 2009.9
398 pp.(H)
ISBN 3-642-01006-7
20,900円
Contents
1.Introduction/ 2.Fundamentals of Machining Explained for Turning/ 3.Tool Life T/ 4.Tool- and Machine Curves/ 5.Metal Removal Rate and Chip Volume Ratio/ 6.Cutting Materials/ 7.Turning/ 8.Planning and Slotting/ 9.Drilling/ 10.Sawing/ 11.Milling/ 12.Broaching/ 13.Grinding/ 14.Abrasive Cutting/ 15.Abrasive Belt Grinding/ 16.Honing/ 17.Superfinishing (Shortstroke Honing)/ 18.Lapping/ 19.Further Refinement of the Cutting Materials/ 20.High Speed Cutting (HSC)/ 21.Cutting Fluids (Coolants and Lubricants)/ 22.Cutting Force Measurement in Machining/ Index/
* Machining and cutting technologies are still crucial for many manufacturing processes. This reference presents all important machining processes in a comprehensive and coherent way. It provides the practising engineer with many technical information of the manufacturing processes and collects essential aspects such as maximum obtainable precision, errors or reference values.
* Many examples of concrete calculations, problems and their solutions illustrate the material and support the learning reader. The internet addresses given in the appendix provide with a fast link to more information sources. *
Davim, J. P. ed.
Surface Integrity in Machining
Springer-Verlag 2010.1
215 pp.(H)
ISBN 1-84882-873-X
16,400円
Contents
1. Surface Integrity - Definition and Importance in Functional Performance/ 2. Surface Texture Characterization and Evaluation Related to Machining/ 3. Residual Stresses and Microstructural Modifications/ 4. Characterization Methods for Surface Integrity/ 5. Surface Integrity of Machined Surfaces/ 6. Surface Integrity of Micro- and Nanomachined Surfaces/ References/ Index/
* In machining, a surface can be defined as a border between a machined component and its environment. The term - urface integrity - is used to describe the attributes of a machined surface and its relationship to functional performance. Surface Integrity in Machining describes the fundamentals and recent advances in the study of surface integrity in machining processes. *
Vardoulakis, I. G. & Eftaxiopoulos, D.
Engineering Continuum Mechanics
With Applications from Fluid Mechanics, Solid Mechanics, and Traffic Flow
Springer-Verlag 2010.1
250pp.(H)
ISBN 3-540-25204-5
10,400円
Contents
1.The Continuum/ 2.The Motion/ 3.Mass Balance/ 4.Elementary theory of traffic flow/ 5.Elementary theory of sedimentation/ 6.Saint Venant - Shallow water waves/ 7.Flow inporous media/ 8.Fluidization in artesian flow conditions/ 9.Modelling of granular flow slides/ 10.Energy balance/ Index/ *
Schwartz, A.J. et al. ed.
Electron Backscatter Diffraction in Materials Science 2nd ed.
Springer-Verlag 2009.8
403 pp. (H)
ISBN 0-387-88135-2
18,500円
Contents
1. Present State of Electron Backscatter Diffraction and Prospective Developments/ 2. Dynamical Simulation of Electron Backscatter Diffraction Patterns/ 3. Representations of Texture/ 4. Energy Filtering in EBSD/ 5. Spherical Kikuchi Maps and Other Rarities/ 6. Application of Electron Backscatter Diffraction to Phase Identification/ 7. Phase Identification Through Symmetry Determination in EBSD Patterns/ 8. Three-Dimensional Orientation Microscopy by Serial Sectioning and EBSD-Based Orientation Mapping in a FIB-SEM/ 9. Collection, Processing, and Analysis of Three-Dimensional EBSD Data Sets/ 10. 3D Reconstruction of Digital Microstructures/ 11. Direct 3D Simulation of Plastic Flow from EBSD Data/ 12. First-Order Microstructure Sensitive Design Based on Volume Fractions and Elementary Bounds/ 13. Second-Order Microstructure Sensitive Design Using 2-Point Spatial Correlations/ 14. Combinatorial Materials Science and EBSD: A High Throughput Experimentation Tool/ 15. Grain Boundary Networks/ 16. Measurement of the Five-Parameter Grain Boundary Distribution from Planar Sections/ 17. Strain Mapping Using Electron Backscatter Diffraction/ 18. Mapping and Assessing Plastic Deformation Using EBSD/ 19. Analysis of Deformation Structures in FCC Materials Using EBSD and TEM Techniques/ 20. Application of EBSD Methods to Severe Plastic Deformation (SPD) and Related Processing Methods/ 21. Applications of EBSD to Microstructural Control in Friction StirWelding/Processing/ 22. Characterization of Shear Localization and Shock Damage with EBSD/ 23. Texture Separation for / Titanium Alloys/ 24. A Review of In Situ EBSD Studies/ 25. Electron Backscatter Diffraction in Low Vacuum Conditions/ 26. EBSD in the Earth Sciences: Applications, Common Practice, and Challenges/ 27.Orientation Imaging Microscopy in Research on High Temperature Oxidation/ Index/ *
Kassner, M.
Fundamentals of Creep in Metals and Alloys 2nd ed.
Elsevier 2008.11
320 pp.(H)
ISBN 0-08-047561-2
26,000円
Contents
1.Introduction/ 2.Five-Power-Law Creep/ 3.Diffusional Creep/ 4.Harper Dorn Creep/ 5.Three-Power-Law Viscous Glide Creep/ 6.Superplasticity/ 7.Recrystallization/ 8.Creep Behavior of Particle Strengthened Alloys/ 9.Creep of Intermetallics/ 10.Creep Fracture/ Index/ *
Micunovic, M. V.
Thermomechanics of Viscoplasticity
&Fundamentals and Applications
Springer-Verlag 2009.4
250 pp.(H)
ISBN 0-387-89489-6
12,800円
Contents
1.Theoretical and Experimental Aspects/ 2.Some General Problems/ 3.Applications of the Theory/ References/ Glossary/ Index/
* This comprehensive monograph is the first to treat an important and challenging subject in mechanics, namely, the thermomechanics of viscoplasticity. This entails an examination of the geometrical and thermodynamical properties of mechanical behavior of metals and many polymeric and paste-like materials which are indispensable for developing a rational theory of viscoplasticity. *
272-37 登録日 10.03.03
