Chakrabarty, J.
Applied Plasticity 2nd ed.
Springer-Verlag 2009.11
758 pp.(H)
ISBN 0-387-77673-7
12,800円
Contents
1. Fundamental Principles/ 2. Problems in Plane Stress/ 3. Axisymmetric and Related Problems/ 4. Plastic Bending of Plates/ 5. Plastic Analysis of Shells/ 6. Plastic Anisotropy/ 7. Plastic Buckling/ 8. Dynamic Plasticity/ 9. The Finite Element Method/ Appendix: Orthogonal Curvilinear Coordinates/ References/ Index/
* Applied Plasticity, Second Edition, covers advanced topics in plasticity comprehensively and in detail. This new edition has been updated throughout and includes a large set of homework problems for each chapter, making it ideal for classroom use. *
Koc, M. ed.
Hydroforming for Advanced Manufacturing
Woodhead Pub. 2008.4
412 pp.(H)
ISBN 1-84569-328-0
35,400円
Contents
Part.1: Principles of Hydroforming: 1.Hydroforming systems, equipment, controls and tooling/ 2.Deformation mechanism and fundamentals of hydroforming/ 3.Materials and their characterization for hydroforming/ 4.Formability analysis for tubular hydroformed parts/ 5.Design and modeling of parts, process and tooling in tube hydroforming/ 6.Tribological aspects in hydroforming/ Part.2: Hydroforming Techniques and Their Applications: 7.Pre-forming: tube rotary draw bending and pre-flattening/crushing in hydroforming/ 8.Hydroforming: hydropiercing, end-cutting, and welding/ 9.Hydroforming sheet metal forming components/ 10.Bending and hydroforming of aluminum and magnesium alloy tubes/ 11.Low pressure tube hydroforming/ 12.Comparative analysis of hydroforming techniques/ 13.Fluid cell pressing in the aerospace industry/ 14.Hydroforming and its role in lightweighting automobiles/ 15.Warm hydroforming/ Index/
* Hydroforming uses a pressurised fluid to form component shapes. The process allows the manufacture of lighter, more complex shapes with increased strength at lower cost compared to more traditional techniques such as stamping, forging, casting or welding. As a result hydroformed components are increasingly being used in the aerospace, automotive and other industries. This authoritative book reviews the principles, applications and optimisation of this important process. *
Atkins, T.
The Science and Engineering of Cutting
The Mechanics and Processes of Separating, Scratching and Puncturing Biomaterials,
Metals and Non-metals
Butterworth-Heinemann 2009.8
432 pp.(P)
ISBN 0-7506-8531-X
8,200円
Contents
1. Controlled and uncontrolled separation of parts/ 2. Strength and fracture mechanics: the basics/ 3. Processes of separation/ 4. Surface work and microstructure/ 5. Orthogonal cutting: microtoming to metal planeing/ 6. Types of chip: Fracture transitions and load fluctuations/ 7. Oblique cutting and curved blades: Bacon slicing to helical milling/ 8. Three-dimensional Cutting: Penetration, scratching, grinding, abrasive wear/ 9. Sawing: the design and function of serrations and the removal of matter/ 10. Piercing and perforating: punctures, arms and armor/ 11. Sharpness and Bluntness/ 12. Dynamic cutting/ 13. Biological and medical cutting/ 14. Unintentional cutting. Supermarket plastic bags, falling objects, ships hitting rocks/ Index/ *
Fischer, A. & Bobzin, K. ed.
Friction, Wear and Wear Protection
Wiley-VCH 2009.8
784 pp.(H)
ISBN 3-527-32366-X
36,000円
Contents
1.Plenary Lectures/ 2.Lectures/ 3.Posters/ Index/
* The proceedings collect invited and contributed papers from more than 150 scientists and engineers worldwide which provide an up-to-date overview of the current research on friction and wear, including new systematic approaches as well as innovative technical solutions. *
Ibrahimbegovic, A.
Nonlinear Solid Mechanics
Theoretical Formulations and Finite Element Solution Methods
Springer-Verlag 2009.6
576 pp.(H)
ISBN 90-481-2330-5
12,700円
Contents
1 Introduction/ 2 Boundary value problem in linear and nonlinear elasticity/ 3 Inelastic behavior at small strains/ 4 Large displacements and deformations/ 5 Changing boundary conditions: contact problems/ 6 Dynamics and time-integration schemes/ 7 Thermodynamics and solution methods for coupled problems/ 8 Geometric and material instabilities/ 9 Multi-scale modelling of inelastic behavior/ References/ Index/
* This volume provides insight into modelling and ultimate limit computation of complex structures, with their components represented by solid deformable bodies. The book examines practically all the important questions of current interests for nonlinear solid mechanics: plasticity, damage, large deformations, contact, dynamics, instability, localisation and failure, discrete models, multi-scale, multi-physics and parallel computing, with special attention given to finite element solution methods. *
Beer, F. P. et al.
Statics and Mechanics of Materials
McGraw-Hill 2010.1
800 pp.(H)
ISBN 0-07-338015-6
18,000円
Contents
1. Introduction/ 2. Statics of Particles/ 3. Rigid Bodies: Equivalent Systems of Forces/ 4. Equilibrium of Rigid Bodies/ 5. Distributed Forces: Centroids and Centers of Gravity/ 6. Analysis of Structures/ 7. Distributed Forces: Moments of Inertia/ 8. Concepts of Stress/ 9. Stress and Strain: Axial Loading/ 10. Torsion/ 11. Pure Bending/ 12. Analysis and Design of Beams for Bending/ 13. Shearing Stresses in Beams and Thin-Walled Members/ 14. Transformations of Stress/ 15. Deflection of Beams/ 16. Columns/ Appendices: A: Typical Properties of Selected Materials Used in Engineering/ B: Properties of Rolled-Steel Shapes/ C: Beam Deflections and Slopes/ Photo Credits/ Index/
* The approach of the Beer and Johnston texts has been appreciated by hundreds of thousands of students over decades of engineering education. The Statics and Mechanics of Materials text uses this proven methodology in a new book aimed at programs that teach these two subjects together or as a two-semester sequence. *
Hosford, W. F.
Mechanical Behavior of Materials 2nd ed.
Cambridge University Press 2009.11
448 pp.(H)
ISBN 0-521-19569-1
11,800円
Contents
1. Stress and strain/ 2. Elasticity/ 3. Mechanical tensile testing/ 4. Strain hardening of metals/ 5. Plasticity/ 6. Strain-rate and temperature dependence of flow stress/ 7. Slip/ 8. Dislocation geometry and energy/ 9. Dislocation mechanics/ 10. Mechanical twinning/ 11. Hardening mechanisms/ 12. Discontinuous and inhomogeneous deformation/ 13. Ductility and fracture/ 14. Fracture mechanics/ 15. Viscoelasticity/ 16. Creep and stress rupture/ 17. Fatigue/ 18. Residual stresses/ 19. Ceramics/ 20. Polymers/ 21. Composites/ 22. Mechanical working/ Appendix I: Miller indices/ Appendix II: Stereographic projection/ Index/
* This textbook fits courses on mechanical behavior of materials in mechanical engineering and materials science and includes numerous examples and problems. It emphasizes quantitative problem solving.
* This text differs from others because the treatment of plasticity emphasizes the interrelationship of the flow, effective strain, and effective stress and their use in conjunction with yield criteria to solve problems. The treatment of defects is new, as is the analysis of particulate composites. Schmid’s law is generalized for complex stress states. Its use with strains allows for prediction of R-values for textures. Of note is the treatment of lattice rotations related to deformation textures. *
Alawadhi, E. M.
Finite Element Simulations Using ANSYS
ANSYSを使った有限要素シミュレーション
CRC Press 2009.7
416 pp.(H)
ISBN 1-4398-0160-6
12,600円
Contents
1.Introduction/ 2.Trusses/ 3.Solid Mechanics & Vibration/ 4.Heat Transfer/ 5.Fluid Mechanics/ 6.Multi-Physics/ 7.Meshing Guide/ Index/
* ANSYS is extensively used in the design cycle by industry leaders in the U.S. and around the world and is available in computer labs in most universities. This volume focuses on the use of ANSYS in solving practical engineering problems.
* This book provides students and practicing engineers with the fundamental knowledge of numerical simulation using ANSYS. It treats each physical phenomenon independently in a way that enables readers to pick out single subjects or related chapters and study them as a self-contained unit. The last chapter is devoted to multi-physics analyses and problems. Additionally, the book contains a number of complete tutorials on using ANSYS for real, practical problems. *
272-38 登録日 10.04.12
