Singh, R. ed.
Weld Cracking in Ferrous Alloys
Woodhead Pub. 2008.12
576 pp.(H)
ISBN 1-84569-300-0
33,200円
Contents
1.Welding Technology and Design to Prevent Weld Cracking/ 2. Weld Crack Behaviour, Evaluation and Repair/ 3. Environment-Assisted Weld Cracking/ Index/
* Weld cracks are unacceptable defects that can compromise the integrity of welded structures. Weld cracking can lead to structural failures which at best will require remedial action and at worst can lead to loss of life. Weld cracking in ferrous alloys reviews the latest developments in the design, evaluation, prevention and repair of weld cracks. *
Lippold, J. C. et al.
Welding Metallurgy and Weldability of Nickel-Base Alloys
Blackwell Pub. 2009.8
456 pp.(H)
ISBN 0-470-08714-5
15,400円
Contents
1.Introduction/ 2.Alloying Additions, Phase Diagrams, and Phase Stability/ 3.Solid-Solution Strengthened Ni-base Alloys/ 4.Precipitation Strengthened Ni-base Alloys/ 5.Oxide Dispersion Strengthened Alloys and Nickel Aluminides/ 6.Repair Welding of Ni-base Alloys/ 7.Dissimilar Welding/ 8.Weldability Testing/ 9.Appendices/ Index/
* The metallurgical behavior and "weldability" of nickel-base alloy welds is of critical engineering and commercial importance. Welding Metallurgy and Weldability of Nickel-Base Alloys provides the most up-to-date treatment on how the wide variety of nickel-base alloys respond to the heat and stresses that result from welding.
* Many practical examples and case studies demonstrate the application of these principles, making this a value-rich reference and how-to guide for "hands-on" engineers, technicians, and scientists, as well as undergraduate and graduate students. *
Kirkwood, D. H.
Semi-solid Processing of Alloys
Springer-Verlag 2009.12
140 pp.(H)
ISBN 3-642-00705-8
16,200円
Contents
1. Introduction/ 2. Evolution and Design of Microstructure in Semi-solid Alloys/ 3. Rheology and Modeling/ 4. Industrial Applications/ Index/
* This book presents the state of the art concerning the fundamental aspects of semi-solid processing of alloys and composites, together with the industrial applications. The fundamental aspects include both the microstructure development and characterization, and the rheology of alloy slurries with special attention to both experimental determination and modeling. The industrial applications are also surveyed and particular consideration is given to recent developments in slurry formation. Foreword provided by Prof. Merton C Flemings (MIT), the father and originator of semi-solid processing. *
Chang, Y. A. & Oates, W. A.
Lecture Topics in Alloy Thermodynamics
合金熱力学におけるトピックス
John Wiley & Sons 2009.11
320 pp.(H)
ISBN 0-470-48414-4
11,000円
Contents
1. Review of Fundamentals/ 2. Thermodynamics of Unary Systems/ 3. Calculation of the Thermodynamic Properties of Unary Systems/ 4. Phase Equilibria in Unary Systems/ 5. Thermodynamics of Binary Solutions I: Basic Theory & Application to Gas Mixtures/ 6. Thermodynamics of Binary Solutions II: Theory and Experimental Methods/ 7. Thermodynamics of Binary Solutions III: Experimental Results and Their Analytical Representation/ 8. Two Phase Equilibrium I: Theory/ 9. Two Phase Equilibrium II: Example Calculations/ 10. Binary Phase Diagrams: Temperature Composition Diagrams/ 11. Binary Phase Diagrams: Temperature Chemical Potential Diagrams/ 12. Phase Diagram Topology/ 13. Solution Phase Models I: Configurational Entropies/ 14. Solution Phase Models II: The Configurational Energy/ 15. Solution Models III: The Configurational Free Energy/ 16. Solution Models IV: The Total Gibbs Energy/ 17. Chemical Equilibria I: Single Chemical Reaction Equations/ 18. Chemical Equilibria II: Complex Gas Equilibria/ 19. Chemical Equilibria Between Gaseous and Condensed Phases I/ 20. Chemical Equilibria Between Gaseous and Condensed Phases II/ 21. Thermodynamics of Ternary Systems/ 22. Generalized Phase Diagrams for Ternary Alloys/ Appendix A: Some Linearized Standard Gibbs Energies of Formation/ Appendix B: Some Useful Calculus/ Index/ *
Messerschmidt, U.
Dislocation Dynamics During Plastic Deformation
Springer-Verlag 2009.12
521 pp.(H) + DVD
ISBN 3-642-03176-5
22,600円
Contents
1. Introduction/ 2. Experimental methods/ 3. Properties of dislocations/ 4. Dislocation motion/ 5. Dislocation kinetics, work-hardening and recovery/ 6. Semiconductors/ 7. Ceramic single crystals/ 8. Metallic alloys/ 9. Intermetallic alloys/ 10. Quasicrystals/ 11. Conclusion/ Index/
* The book gives an overview of the dynamic behavior of dislocations and its relation to plastic deformation. It introduces the general properties of dislocations and treats the dislocation dynamics in some detail. Finally, examples are described of the processes in different classes of materials, i.e. semiconductors, ceramics, metals, intermetallic materials, and quasicrystals. *
408-45 登録日 10.01.17
